Welcome to the Raven Knowledge Base! Our goal is to empower you, our customer, by providing the tools necessary to resolve issues. The database is a searchable library containing information relating to our products and services. New articles are added frequently and are updated as needed.
If updating an ISO product controller node, refer to this Knowledge article for a list of nodes capable of being updated in the field.
Connect to the CANBUS / ISOBUS
Follow this knowledge article for recommendations on where to connect the CAN adapter cable. After connecting to the cabling, launch the Raven Service Tool program and select Connect.
Updating the Node
The following images were captured while updating a SmarTrax Mechanical Drive Unit, which is on a separate CANBUS (ISO compatible). The process for updating nodes will be the same for all CANBUS and ISOBUS nodes.
Select Browse from the Raven Service Tool main screen.
Navigate to the USB drive, then select the proper software for the node.
Right-click on the node and select Program.
Any node able to be updated with the software selected will be highlighted in blue. If you right-click on a node and the Program option is gray, the software is not compatible with the node.
The update will then start. The bar at the bottom of the window shows the progress of the update. The address of the node being updated is also visible in this location.
If the update fails, disconnect from the CANBUS / ISOBUS then reconnect and restart the process from the beginning.